loading
News
Home  > Information Center  > News  > 

How to Operate the 4-Sided Planer Moulder

How to Operate the 4-Sided Planer Moulder

2024-07-12

Oversized wooden homes, beams, timber structures, glued wood, solid heavy cutting, and super broad linear machining of laminated wood are the major applications for a  4-sided planer moulder. Read on to learn more about how to operate this wooden moulding machine.


Key Characteristics of the Product

● A powerful permanent magnet motor is directly coupled with a heavy-duty reducer, allowing for the efficient conveyance of large-sized wood.

● The processing versatility is enhanced by the double-layer work table design that the left and right vertical axes utilize. The axial adjustment amount can reach Φ30mm, and two sets of cutting tools can be installed.

● Thirdly, the horizontal cutter axis's front and back plates, as well as all four feeding wheels and the side pressure wheel, use pneumatic pressing mode. The pressure is adjustable, and the operation is convenient.

● The electric mechanism is connected to the pneumatic locking mode for the movement adjustment of the cutter axis, making it safe, reliable, and easy to operate.

● The spindle's high-power magnet motor, which is powered by a synchronous belt, allows for powerful cutting.

● The inclusion of a separate electric lifting pneumatic pressing upper plate device expands the processing range, and the second lower cutter axis can accommodate saw blades with a diameter of up to Φ250mm.

● A manual pump's displacement components can be an electric pump, a quantitative (adjustable) lubrication workstation, or both.

● Equipped with high-quality electrical components from renowned brands, ensuring reliable operation.

● The fully enclosed protective cover helps prevent sawdust splash and isolation noise while also protecting workers.

uploads/v-holdmachinery.com/images/17207787238016.png

Safety Measures

Get familiar with the 4-Sided Planer Moulder safety rules and regulations before you use the machine.

● Protect your eyes, ears, and face from harmful particles by donning a dust mask, safety glasses, and other PPE as directed.

● Wearing loose clothing or jewellery increases the risk of getting trapped in the machinery.

● Keep the work area clear of any debris that could cause someone to trip.

● Before each usage, make sure the machine is free of damage and wear.

● Verify the proper installation and operation of all safety measures.

● Learn where the emergency stop button is and how to use it.

● It is recommended that operators participate in regular safety training and exercises to ensure that they are ready for everything.


Getting Your Four-Sided Planer Ready to Use

Read the instructions carefully before using your four-sided planer for the first time. Adjusting the planer bed to your specifications and making sure you have the necessary materials and safety equipment, such as goggles and earplugs, are all part of this. Also, before you begin cutting, make sure your blades are honed properly and at the right angle.

 

Look over your project plan one last time before you start cutting with the  4-sided planer moulder. Visualize the final form of the product and identify any areas that may necessitate further care during manufacturing. That way, you'll be prepared to make any necessary adjustments as you run the planer.

 

Mistakes can be made with  4-sided planer moulder if they are not constantly checked. Therefore, it's important to check your work often. If you want your four-sided planer to last and work well, you need to keep it well-maintained. Before using the planers, always make sure they are sharp, free of bent or chipped parts, and properly fastened to the machine. You should also inspect them for any signs of damage. Regular treatment and care may extend the life of your four-sided planer.

uploads/v-holdmachinery.com/images/17207787632635.png

Some Problems to Look Out For in Your Four-Sided Planers

Problems with a four-sided planer do arise from time to time. Problems with the magnet motor, dull or chipped blades, or unscrewed bolts and screws are all examples of such things. Luckily, you can repair typical difficulties by following certain troubleshooting procedures. In order to correctly diagnose and fix your computer, you must read the user handbook thoroughly before beginning any repairs.


Maximizing the Use of Your Four-Sided Planer

The first step in making sure your  4-sided planer moulder works as intended is to set it up correctly. If you want precise results, you need to change the blades on your machine and set it to the material you're cutting. Also, double-check that all of the bolts are snug and that the rollers are in the correct position. To get the most out of your tool, it's important to clean and lubricate it regularly.


Bottom Line

Selecting the number of tool axes and the adjustment location between them are the only two options when choosing a four-sided planer. The batch size, the workpiece's shape, the feeding location, the processing benchmark, and the workpiece's ease along the tool axis are some of the additional considerations that should inform this decision. Changing processing environments and workpiece types necessitate an ad hoc approach to determining which four-sided planer to utilize.

When choosing a machine tool, it's important to consider the processing needs in different directions, make plans overall, consider the technical requirements and capital investment thoroughly, and then, based on that, choose a machine tool that meets the most processing needs while keeping expenses low and operating and maintaining it easily. Visit V-hold Machinery to place your order for a 4-sided planer moulder.


Contact