V-hold Machinery - Woodworking Machinery Manufacturer Focusing on Solid Wood Machinery that to be the excellence brand !
16A series four-sided planer is mainly used for solid wood, fibreboard and other furniture small cutting four-sided polishing or simple linear processing, such as: solid wood picture frame, Roman column, kick line and so on.
Product features:
1.Full range of products standard frequency conversion feeding system,
feeding 6-36 m / min;
2.Standard short material device;
3.High precision spindle, rotational speed 6200r/min (optional higher speed);
4.Independent motor start, according to customer actual processing needs,
separate opening and closing spindle (optional with different configuration
of motor power);
5.Weight-resistant cutting gearbox. 6. Equipped with 3 positions emergency
stop device, install open door cover power off and feed port limit
high limit switch.
Wood sample of processed products
Machine function
Take the initiative to feed the next wheel, the cylinder provides idler pressure, wet and dry materials can be fed smoothly. | Each cutter shaft is assembled and tested under air-conditioned enviroment and is supported by SKF bearing.The stable-worked shaft guarantees the surface smoothness of finished products. | Efficient dust removal, the new suction structure can better absorb sawdust. It minimizes the indentation on the surface of the finished product and effectively controls the noise. |
A withdrawal switch and an emergency stop switch are added at the back of the machine tool to facilitate operation and adjustment. | Feed frequency converter digital display, easy to operate, reduce, energy saving, reduce mechanical transmission wear. | The panels on both sides of the rear lower shaft can move freely, and it is very convenient for all kinds of tools to be replaced. |
Machine specification
Model | VH-M616A | |
Machine parameters | Working width(mm) | 25~160 |
Working thickness(mm) | 8~120 | |
In-feed-table length(mm) | 1500 | |
Feeding speed(m/min) | 6~36 | |
Spindle diameter(mm) | φ40 | |
Spindle revolution speed(r/min) | 6200 | |
Air pressure(Mpa) | 0.6 | |
Motor power(kw) | 1st Bottom spindle | 4kw/5.5HP |
Right vertical spindle | 4kw/5.5HP | |
Left vertical spindle | 5.5kw/7.5HP | |
1st Top spindle | 5.5kw/7.5HP | |
2nd Top spindle | 4kw/5.5HP | |
2nd Bottom spindle | 4kw/5.5HP | |
Top spindle lifting | 0.55kw/0.75HP | |
Feeding beam lifting | 0.75kw/1HP | |
Feeding motor | 4kw/5.5HP | |
Total power | 31.55kw/40.8HP | |
Spindle diameter(mm) | 1st Bottom spindle | φ125 |
Right vertical spindle | φ125~φ160 | |
Left vertical spindle | φ125~φ160 | |
1st Top spindle | φ125~φ160 | |
2nd Top spindle | φ125~φ160 | |
2nd Bottom spindle | φ125~φ160 | |
Remar | Feeding wheel diamter(mm) | φ140 |
Dust outlet diameter(mm) | φ140 | |
Overall dimensions(mm) | L3750*W1550*H1720 | |
Weight(kg) | 3700 | |
Air volume | / |
Machine structure
The internal structure is precise and orderly. | Concise operation panel | Rise and fall of cylindrical column |
Double lubrication system | Safety protection of feed limit for front worktable | Double explosion-proof lighting system |
Copyright © 2020 V-hold Woodworking Machinery Manufacturing Co., Ltd. | All Rights Reserved Sitemap