Quality four side moulder woodworking machine factory for wood moulding

Quality four side moulder woodworking machine factory for wood moulding-1

Quality four side moulder woodworking machine factory for wood moulding-2

Model		VH-M823
specification	Working width	25-230
	Working thickness	8-160
	Working table length	1970
	Feeding speed	6-36
	Main spindle diameter	Φ 40
	Main spindle revolution	6500
	Air pressure	0.6
Motor power	1st Lower shaft	7.5kw/10H
	1st Right vertical spindle	7.5kw/10HP
	1st Left vertical spindle	7.5kw/7.5HP
	2nd Right vertical spindle	7.5kw/10HP
	2nd Left vertical spindle	7.5kw/10HP
	1st Upper shaft	11kw/15HP
	2nd Upper shaft	7.5kw/10HP
	2st Lower shaft	7.5kw/10HP
	Feeding beam lifting	1.1kw/1.5HP
	Feeding motor	7.5kw/10HP
	Top power	72.1kw/98HP
Cutter diameter	1st Lower shaft	Φ 125
	Right vertical spindle	Φ 125-Φ 180
	Left vertical spindle	Φ 125-Φ 180
	1st Upper shaft	Φ 125-Φ 180
	2nd Upper shaft	Φ 125-Φ 180
	2nd Lower shaft	Φ 125-Φ 200
Remark	Feeding wheel diameter	Φ140
Remark	Dust outlet diameter	Φ140

ELECTRONIC/PNEUMATIC/CONTROL CONFIGURATION

Feed frequency converter Frequency conversion digital display, feeding speed 6-36 m / min, easy to operate, reduce, energy saving, reduce mechanical variable speed wear.
Fast hatch able short material This mechanism can effectively improve the smooth feeding of short material, and the auxiliary feeding wheel has the function of transmission, which makes the feeding more light, and the feeding wheel can be lifted to facilitate the replacement or adjustment of tool
Precision spindle-Each tool shaft is assembled and tested in the air conditioning room. Both ends are supported by imported SKF bearings, absolutely smooth operation of the tool shaft, to ensure the surface finish of the finished product.
Front and back press-The pressure can be adjusted separately, even if the thickness of wood changes greatly, it can be firmly pressed on the working table.
Heavy cutting gearbox. The feeding wheel is driven by universal joint and gearbox to ensure no power loss. The feeding is extremely smooth, the transmission force is strong, and the feeding precision is high.
Post discharge active panel The rear lower shaft panel is free to move, and all kinds of tool replacement are very easy.
The front and back pressing plate can be adjusted respectively. Even the wood thickness changes frequently, you can stabilize it under worktable.
Excellent processing equipment Meticulous careful production to ensure that each part is almost perfect!
Rear discharge activity panel. The rear lower axle panel can be moved freely, and all kinds of tools can be replaced easily.

Processing technology

Bed height rigid integrated structure It is made of cast iron with damping property to ensure the smooth operation of cutter shaft and feeding system.Sophisticated processing equipment
Sophisticated processing equipment Meticulous and meticulous production to ensure that every part is nearly perfect!
Japan four axis linkage machining center All shaft frame, gear box and other accessories, the company is equipped with its own processing center to work, to ensure that the accessories precision
Spindle dynamic balance test Each spindle is equipped with imported SKF bearing to ensure the high precision and smooth operation of the cutter shaft Line.

QUALIFICATION

Quality four side moulder woodworking machine factory for wood moulding-16

Quality four side moulder woodworking machine factory for wood moulding-17

Quality four side moulder woodworking machine factory for wood moulding-18

Quality four side moulder woodworking machine factory for wood moulding-19

Quality four side moulder woodworking machine factory for wood moulding-20

x******p

V-hold Machinery four side moulder woodworking machine is manufactured exquisitely. It is produced under precise processing technology to assure the cutting, heat treating, polishing, and other workmanship are precisely done. With a multi-layered polished surface, it ensures its durability and reliability

q******x

The electrolyte used in V-hold Machinery four side moulder woodworking machine is scrutinized. Any inferior electrolyte which easily volatilizes and leaks under high temperature is weeded out. Welded carefully, it is scratch-proof and won't hurt people

r******o

The manufacture of V-hold Machinery molder woodworking requires professional industry know-how. It undergoes PCB fabrication, heat treatment, surface polishing, CNC cutting, etc, and all these processes are carried out by expert production workers. It is made to provide easy additional security for years to come

b******h

The design of V-hold Machinery four side moulder woodworking machine is a complex process. From 3D modeling, stress on parts, to construction, every detail is well taken care of. It has been proved that it has a superior waterproof performance

r******k

V-hold Machinery four side moulder woodworking machine will be inspected for its safety parameters by the QC team. It has to be checked using the cutting-edge testing machines for its insulation performance, overload and overvoltage withstanding capacities and electromagnetic compatibility. It is characterized by high dimensional stability

o******j

This product has qualified tensile strength. It is subject to rigorous durability and strength testing as part of the manufacturing process. The product has the advantages of heavy tension and impact resistance

Product Message

*Name

Phone

*E-mail

*Content