Working width: 25-230mm
working thickness: 8-160mm
working table length: 1970mm
feeding speed: 6-36m/min
Main shaft diameter: 40mm
Main shaft revolution: 6000r/min
Air pressure: 0.6MPa
V-hold Machinery molder woodworking is computer-aided designed (CAD). Workers who are responsible for CAD are abundant in creating and designing inflatable items experience. V-hold Machinery is a leading woodworking machinery manufacturer & supplier since 1996, main products include 4-sided moulder & multiple rip saw2.
V-hold Woodworking Machinery Manufacturing Co., Ltd have super productivity to ensure timely shipment. V-hold Machinery has over 27 years of professional four-sided plane production & wood board production3.
The product features an effective and thorough cleaning effect. It is created to fit flexibility to curved corners and the hard to reach places. 4.
The product has good tensile strength. Some non-toxic chemical agents such as softener are used to enhance the stretching force between fibers. 5.
The product is resistant to ozone. It is not easy to occur drying, cracking, flaking, hardening and scaling when exposed to ozone.
Professional solution for processing Hard wood strip, floor,
doors and large cutting capacity strips.
|Working table length||1970||1700|
|Mian spindle diameter (mm)||Φ 40||Φ 40|
|Main spindle revolution (r/min)||6500||6500|
|Air pressure (Mpa)||0.6||0.6|
|Motor power (KW)||1st Lower Shaft||5.5kw/7.5HP||5.5kw/7.5HP|
|Right vertical spindle||5.5kw/7.5HP||5.5kw/7.5HP|
|Left vertical spindle||5.5kw/7.5HP||5.5kw/7.5HP|
|1st Upper Shaft||7.5kw/10HP||7.5kw/10HP|
|2nd Upper Shaft||5.5kw/7.5HP|
|2nd Lower Shaft||5.5kw/7.5HP||5.5kw/7.5HP|
|Feeding beam lifting||0.55kw/0.75HP||0.55kw/0.75HP|
|Cutter diameter||1st Lower Shaft||Φ 125||Φ 125|
|Right Vertical spindle||Φ 125-Φ 180||Φ 125-Φ 180|
|Left vertical spindle||Φ 125-Φ 180||Φ 125-Φ 180|
|1st Upper Shaft||Φ 125-Φ 180||Φ 125-Φ 180|
|2nd Upper Shaft||Φ 125-Φ 180|
|2nd Lower Shaft||Φ 125-Φ 200||Φ 125-Φ 200|
|Remark ||Feeding wheel diameter (mm)||Φ140||Φ140|
|Dust outlet diameter (mm)||Φ140||Φ140|
Rapidly flip-short feeding device This mechanism effectively menhance the smooth feeding of short material, auxiliary feed wheel has a drive power to make feeding more brisk. Feeding off the wheel, easy to replace the tool and calibrated.
Every spindle is tested and assembled in dust free room, with SKF bearing on the double end before finished. Absolute smooth running of the spindleensure the finished surface without any roughness.
Feed returned material and emergency stop button at the rear of the machine so as to facilitate operation and adjustment.
Feeding frequency inverterDigital display, easy operation, energy saving, reduction of mechanical transmission wear.
Exquisite production technology, internal precision machinery.
Thanks to our highest level production standards and reliable delivery schedules, we have been able to maintain a solid customer base around the world.2.
Looking into the future, our company will always seek ways to actively evolve and disrupt our industry to the benefit of our clients.