|Specification and Model
|Max. Working wiidth (mm)
|Min. Working width (mm)
|Max. Working length (mm)
|Min. Working length (mm)
|Feeding speed (m/min)
|Vertical and click shaft revolution (r/min)
|Vertical and click shaft diameter (mm)
|Vertical milling cutter diameter (mm)
|Click milling cutter diameter (mm)
|Feeding rubber roller diameter (mm)
|Vertical spindle motor power (kw)
|Card buckle spindle motor power (kw)
|Feeding motor power (kw)
|Elevatory motor power (kw)
|Lifting motor power (kw)
|0.75kw (width openning motor)
|Total power (kw)
|Air pressure (MPa)
|Physcial dimension (mm)
|With conveyor belt for material delivery, the labour intensity of the operators can be reduced.
|With high speed electric driven shaft, the clamp cutter can be frequency cinverted within the scope of 6,000-8,000r/min.
|The material pressing pressure is shown on the panel, which is quite convenient for direct veiwing.
|The floor plates are sent into the running bearings of the machining track with the material feeder and delivery rubber rollers, and the guiderails are made with extra hard materials, ensuring the machining precision.
|With high speed electric driven shaft, the motor can be adjusted within the scope of 6,000-8,000r/min.
|With the pressing plate and extra hard supplementary work table, the floor machining is very precise.